Gorman-Rupp PAH8A60C-B Prime Aire Plus Pump
Spare Parts for the Gorman-Rupp PAH8A60C-B Priming-assisted dewatering pump
Product Summary
Genuine OEM spare parts for the Gorman-Rupp PAH8A60C-B, a priming-assisted pump with an air compressor and eductor that prime and re-prime the pump automatically. Impellers, seals, wear parts, check valves and bearings, plus priming-system parts, are listed below with Gorman-Rupp part numbers from manual OM-06455-04.
Spare Parts List
✓ Tick the parts you need. Codes are as printed in the Gorman-Rupp parts list; build variants and older serial numbers can use different parts, so pick your model in the form below. Not sure? Add a photo of the nameplate (model and serial number) and we’ll match the parts for you.
| Select | Part (as printed by Gorman-Rupp) | Part number & reference |
|---|---|---|
| Wear & Service Parts | ||
| Impeller | Part no. 38621-734 11010 · Item 5 | |
| 3.25" Mech Seal | Part no. 25285-822 · Item 7 | |
| Shaft Sleeve | Part no. 31163-022 17000 · Item 8 | |
| Wear Ring | Part no. 38691-373 11010 · Item 25 | |
| Check Valve Kit 8" | Part no. 48274-006 · Item 26 | |
| Check Valve | Part no. 26642-147 | |
| Flapper | Part no. 26688-013 | |
| 1/2" Check Valve | Part no. 26641-092 · Item 42 | |
| Repair Rotating Assy | Part no. 44163-664 · Item 1 | |
| Shim Set | Part no. 48261-033 · Item 6 | |
| Seals, Bearings & Shaft | ||
| O-Ring | Part no. 25152-387 · Item 5 · Qty 2 | |
| Gasket 10" | Part no. 25113-040 · Item 8 | |
| Gasket | Part no. 25113-034 · Item 17 | |
| Cover O-Ring | Part no. 25152-382 | |
| Flange Gasket | Part no. 25113-038 | |
| O-Ring | Part no. 25152-150 · Item 9 | |
| Seal Plate | Part no. 38272-272 10000 · Item 10 | |
| Oil Seal | Part no. 25227-856 · Item 18 · Qty 2 | |
| Gasket | Part no. 38683-665 19370 · Item 20 | |
| Roller Bearing | Part no. 23535-001 · Item 22 | |
| Impeller Shaft | Part no. 38512-542 1600X · Item 24 | |
| Bearing | Part no. 23422-417 · Item 26 | |
| Bearing Cap Gasket | Part no. 38683-664 19060 · Item 29 | |
| Oil Seal | Part no. 25258-845 · Item 31 | |
| Gasket | Part no. 38687-053 19060 · Item 8 | |
| Priming Valve Gasket | Part no. 38683-657 19060 · Item 4 | |
| Priming System | ||
| Priming Chamber Kit | Part no. 48275-005 · Item 9 | |
| Air Compressor Assy | Part no. 46181-909 · Item 38 | |
| Priming Chamber Assy | Part no. 46112-709 · Item 1 | |
| Priming Valve | Part no. 26664-007 · Item 1 | |
| Orifice Button | Part no. 26688-021 | |
| Priming Chamber | Part no. 38343-020 10000 · Item 5 | |
| Strainer Assy | Part no. 46641-222 17000 · Item 6 | |
| Air Compressor Cover | Part no. 38354-043 15120 · Item 5 | |
| Air Compressor | Part no. 26813-111 · Item 6 | |
| Air Compressor Knob | Part no. 38429-501 19550 · Item 11 | |
| Other Core Parts | ||
| Sight Gauge | Part no. S1471 · Item 21 · Qty 2 | |
| Pressure Relief Valve | Part no. 26662-028 · Item 17 | |
How we confirm the exact part: Part numbers on this page are as printed in Gorman-Rupp manual OM-06455-04, parts list for serial numbers 1625183 and up. Pumps with earlier serial numbers, an “N” serial suffix or a different build can use different parts, so send the serial number or a nameplate photo and we’ll confirm the right part before we quote. Engine and power-unit parts are not covered on this page.
Service Intervals & When to Replace
- Daily: check general condition (temperature, noise, vibration, leaks) and pump performance (gauges, speed, flow).
- Lubrication: check bearing and seal-cavity lubrication weekly; replace the seal-cavity oil annually.
- Every six months: inspect front impeller clearance (wear plate) and rear clearance (seal plate) and adjust or replace worn parts.
- Annually: inspect the check valve, bearings, shaft deflection and pump-to-driver alignment; clean the pressure relief valve.
- New applications: inspect wearing parts after the first 250 hours to set your wear rate. Intervals assume about 4,000 hours a year of intermittent duty; shorten them for abrasive or continuous duty.
Models
One page covers the PAH8A60C-B pump end across its engine and drive builds. The pump end, priming chamber and check valve parts are common; engine parts are not listed. The full model code is on the pump nameplate.
Models & Key Specifications
| Model | Series | Ports (suction x discharge) | Max solids | Seal (as listed) | Parts list |
|---|---|---|---|---|---|
| PAH8A60C-B | Prime Aire Plus (PAH Series) | 10" x 8" (250 x 200 mm) | 3.00" (76 mm) | 3.25" Mech Seal | OM-06455-04 (S/N 1625183+) |
Port size and solids handling from Gorman-Rupp model data; parts from manual OM-06455-04. Typical uses: site and mine dewatering, bypass pumping and hire fleets.
Troubleshooting
Pump fails to prime
Likely cause: Discharge check valve contaminated, damaged or not seating, an air leak in the suction line, a worn seal or gasket, a damaged air compressor or broken belt, or a clogged strainer. Action: Clean or replace the check valve, correct leaks, check pump vacuum and replace the worn seal or gasket, repair the compressor or belts, and clean the strainer.
Low flow or pressure
Likely cause: Eductor or strainer clogged, impeller or other wearing parts worn or damaged, or suction lift too high. Action: Clean the eductor and strainer, replace worn parts and check the impeller is centred and turns freely, and reduce suction lift.
Pump clogs frequently
Likely cause: Discharge flow too slow, a clogged or binding check valve, or liquid too thick. Action: Open the discharge valve fully, run at full governed speed, clean the check valve and dilute if possible.
Pump requires too much power
Likely cause: Pump speed too high, discharge head too low, liquid too thick, or a frozen pump or jack shaft bearing. Action: Check driver output, adjust the discharge valve, dilute if possible, and check and replace bearings.
Request for Quotation
Selected Parts:
- No parts selected
Not sure which parts? Just send a photo of the nameplate or part below.
Gorman-Rupp PAH8A60C-B spare parts: frequently asked questions
Tap a question to see the answer.
What spare parts are listed for the Gorman-Rupp PAH8A60C-B?
Parts come from Gorman-Rupp manual OM-06455-04, grouped as wear and service parts; seals, bearings and shaft; priming system; and other core parts. They include the impeller, mechanical seal, shaft sleeve, wear ring, check valve kit and check valve, each listed with its Gorman-Rupp part number as printed.
Why won’t my PAH8A60C-B prime?
Likely causes from the troubleshooting guide: discharge check valve contaminated, damaged or not seating, an air leak in the suction line, a worn seal or gasket, a damaged air compressor or broken belt, or a clogged strainer. The fixes are in the troubleshooting table above.
How do I restore lost flow or pressure on a PAH8A60C-B?
The troubleshooting guide on this page lists the likely causes as: eductor or strainer clogged, impeller or other wearing parts worn or damaged, or suction lift too high. Clean the eductor and strainer, replace worn parts and check the impeller is centred and turns freely, and reduce suction lift.
How do I make sure I order the right PAH8A60C-B parts?
Tick the parts you need and your selection carries into the quote form. Add a nameplate photo or serial number and we’ll confirm the parts before quoting. See other models in our Prime Aire Series parts, or all Gorman-Rupp spare parts.