Gorman-Rupp V6A60-B Ultra V Series Pump
Spare Parts for the Gorman-Rupp V6A60-B High-head self-priming pump
Product Summary
Genuine OEM spare parts for the Gorman-Rupp V6A60-B, a high-head self-priming solids-handling pump with the same easy-access service design as the Super T. Impellers, seals, wear parts, check valves and bearings are listed below with Gorman-Rupp part numbers from manual OM-05817-02.
Spare Parts List
✓ Tick the parts you need. Codes are as printed in the Gorman-Rupp parts list; build variants and older serial numbers can use different parts, so pick your model in the form below. Not sure? Add a photo of the nameplate (model and serial number) and we’ll match the parts for you.
| Select | Part (as printed by Gorman-Rupp) | Part number & reference |
|---|---|---|
| Wear & Service Parts | ||
| Impeller | Part no. 38615-102 11010 · Item 1 | |
| Cartridge Seal Assy | Part no. 46513-155 · Item 3 | |
| Wear Plate Assy | Part no. 46451-759 24150 · Item 7 | |
| Flap Valve Assy | Part no. 46411-154 24010 · Item 24 | |
| Flap Valve Cover | Part no. 38346-620 17040 · Item 25 | |
| Repair Rotating Assy | Part no. 44163-452 · Item 2 | |
| Wear Plate Assy (hard iron option) | Part no. 46451-759 24160 | |
| Wear Plate Assy (stainless steel option) | Part no. 46451-759 24170 | |
| Seals, Bearings & Shaft | ||
| O-Ring | Part no. S1676 · Item 19 · Qty 2 | |
| Suction Gasket | Part no. 38683-659 19370 · Item 23 | |
| Fill Port Gasket | Part no. 50G 19210 | |
| O-Ring | Part no. 25152-381 · Item 33 | |
| O-Ring | Part no. S1472 · Item 36 | |
| Seal Plate | Part no. 38272-262 10000 · Item 4 | |
| Gasket | Part no. 38687-059 20000 · Item 5 | |
| Oil Seal | Part no. 25227-771 · Item 6 · Qty 2 | |
| Oil Seal | Part no. S1907 · Item 19 | |
| Gasket | Part no. 38683-474 18000 · Item 21 | |
| Ball Bearing | Part no. 23422-414 · Item 24 | |
| Impeller Shaft | Part no. 38514-826 16000 · Item 26 | |
| Ball Bearing | Part no. 23422-019 · Item 27 | |
| O-Ring | Part no. 25154-131 · Item 28 · Qty REF | |
| Other Core Parts | ||
| Back Cover Assembly | Part no. 42111-839 · Item 12 | |
| Suction Flange | Part no. 38641-533 10000 · Item 22 | |
| Inspect Cover Assy | Part no. 42111-456 · Item 35 | |
| Pressure Relief Valve | Part no. 26662-007 | |
| Flange Kit | Part no. 48213-118 | |
| Flange Kit | Part no. 48213-154 | |
| Flange Kit | Part no. 48213-155 | |
| Sight Gauge | Part no. S1471 · Item 15 · Qty 2 | |
How we confirm the exact part: Part numbers on this page are as printed in Gorman-Rupp manual OM-05817-02, parts list for serial numbers 1727310 and up. Pumps with earlier serial numbers, an “N” serial suffix or a different build can use different parts, so send the serial number or a nameplate photo and we’ll confirm the right part before we quote.
Service Intervals & When to Replace
- Daily: check general condition (temperature, noise, vibration, leaks) and pump performance (gauges, speed, flow).
- Lubrication: check bearing and seal-cavity lubrication weekly; replace the oil annually (SAE No. 30 non-detergent oil where specified).
- Every six months: inspect front impeller clearance (wear plate) and rear clearance (seal plate) and adjust or replace worn parts.
- Annually: inspect the check valve, bearings, shaft deflection and pump-to-driver alignment; clean the pressure relief valve.
- New applications: inspect wearing parts after the first 250 hours to set your wear rate. Intervals assume about 4,000 hours a year of intermittent duty; shorten them for abrasive or continuous duty.
Models
Model code: V6A60-B. Suffixes such as /F, /FM, /WW and /WWS mark build variants (for example flanged or metric-flanged ports) that change some parts, so check the full model code and serial number on the nameplate.
Models & Key Specifications
| Model | Series | Ports (suction x discharge) | Max solids | Seal (as listed) | Parts list |
|---|---|---|---|---|---|
| V6A60-B | Ultra V Series | 8" x 6" (200 x 150 mm) | 3.00" (76 mm) | Cartridge Seal Assy | OM-05817-02 (S/N 1727310+) |
Port size and solids handling from Gorman-Rupp model data; parts from manual OM-05817-02. Typical uses: high-head sewage lift stations, long-run transfer and mine dewatering.
Troubleshooting
Pump fails to prime
Likely cause: Not enough liquid in the casing, a contaminated or damaged suction check valve, an air leak in the suction line, or a leaking or worn seal or gasket. Action: Fill the casing, clean or replace the check valve, correct leaks and check pump vacuum; replace a leaking or worn seal or gasket.
Low flow or pressure
Likely cause: Impeller or other wearing parts worn or damaged, impeller clogged, or suction lift too high. Action: Replace worn parts and check the impeller is centred and turns freely (adjust wear plate clearance); clear debris; reduce suction lift.
Pump clogs frequently
Likely cause: Discharge flow too slow, a clogged or binding check valve, or liquid too thick. Action: Open the discharge valve fully to raise the flow rate, clean the check valve, and dilute if possible.
Excessive noise
Likely cause: Cavitation, entrained air, loose mounting, or a clogged or damaged impeller. Action: Reduce suction lift and losses, remove the air source, secure the mounting, and clear or replace the impeller.
Bearings run too hot
Likely cause: Low or incorrect lubricant, unsupported piping or a misaligned drive. Action: Check lubricant type and level, support the piping and align the drive.
Request for Quotation
Selected Parts:
- No parts selected
Not sure which parts? Just send a photo of the nameplate or part below.
Gorman-Rupp V6A60-B spare parts: frequently asked questions
Tap a question to see the answer.
What spare parts are listed for the Gorman-Rupp V6A60-B?
Parts come from Gorman-Rupp manual OM-05817-02, grouped as wear and service parts; seals, bearings and shaft; and other core parts. They include the impeller, cartridge seal assembly, wear plate assembly, flap valve assembly, flap valve cover and repair rotating assembly, each listed with its Gorman-Rupp part number as printed.
Why won’t my V6A60-B prime?
Likely causes from the troubleshooting guide: not enough liquid in the casing, a contaminated or damaged suction check valve, an air leak in the suction line, or a leaking or worn seal or gasket. The fixes are in the troubleshooting table above.
How do I restore lost flow or pressure on a V6A60-B?
The troubleshooting guide on this page lists the likely causes as: impeller or other wearing parts worn or damaged, impeller clogged, or suction lift too high. Replace worn parts and check the impeller is centred and turns freely (adjust wear plate clearance); clear debris; reduce suction lift.
How do I make sure I order the right V6A60-B parts?
Tick the parts you need and your selection carries into the quote form. Add a nameplate photo or serial number and we’ll confirm the parts before quoting. See other models in our Ultra V Series parts, or all Gorman-Rupp spare parts.