Tsurumi KTV & KTVE Series Drainage Pumps
Spare Parts for Tsurumi KTV and KTVE Submersible Drainage Pumps
Product Summary
Genuine OEM spare parts for the Tsurumi KTV and KTVE series, the lightweight submersible drainage pumps used for site drainage and dewatering, with KTVE models adding automatic level control. Mechanical seals, urethane impellers, wear rings, strainer stands, packing sets, bearings and motor protectors for 11 models are listed below with their Tsurumi part numbers.
Spare Parts List
✓ Tick the parts you need. Codes are as printed in the Tsurumi parts lists and many are model-specific, so pick your model in the form below. Not sure which model you have? Add a photo of the nameplate and we’ll match the parts for you.
| Select | Part (as printed by Tsurumi) | Part number & fits |
|---|---|---|
| Common Service Kits | ||
| Packing & O-Ring Set | Part no. 173-472-19 · Fits KTV2-15, KTV2-22 | |
| Packing & O-Ring Set | Part no. 173-473-10 · Fits KTV2-37, KTV2-37H | |
| Packing & O-Ring Set | Part no. 173-492-15 · Fits KTV3-55 | |
| Packing & O-Ring Set | Part no. 173-490-13 · Fits KTVE2.75-50 | |
| Packing & O-Ring Set | Part no. 173-522-15 · Fits KTVE21.5-51, KTVE22.2-51 | |
| Packing & O-Ring Set | Part no. 173-553-15 · Fits KTVE33.7-50 | |
| Packing & O-Ring Set | Part no. 173-559-11 · Fits KTVE35.5-51 | |
| Mechanical Seal H-20T SiC | Part no. 025-000-99 · Fits KTV2-15, KTV2-22, KTVE21.5-51, KTVE22.2-51 | |
| Mechanical Seal H-25T SiC | Part no. 025-001-00 · Fits KTV2-37, KTV2-37H, KTV3-55, KTVE33.7-50, KTVE35.5-51 | |
| Mechanical Seal W-14VL SSiC (ROHS) | Part no. 025-000-81 · Fits KTVE2.75-50 | |
| Oil Lifter H-20(A)(T) Resin | Part no. 030-144-13 · Fits KTV2-15, KTV2-22, KTVE21.5-51, KTVE22.2-51 | |
| Oil Lifter H-25(A)(T) Resin | Part no. 030-143-12 · Fits KTV2-37, KTV2-37H, KTV3-55, KTVE33.7-50, KTVE35.5-51 | |
| Wear & Consumable Parts | ||
| Impeller (50Hz) Urethane Rubber | Part no. 021-007-52 · Fits KTVE2.75-50 | |
| Wear Ring KTV2-15/22 BR+NR | Part no. 031-000-08 · Fits KTV2-15, KTV2-22, KTVE21.5-51, KTVE22.2-51 | |
| Wear Ring KTV2-37 BR+NR | Part no. 031-000-09 · Fits KTV2-37, KTV2-37H, KTVE33.7-50 | |
| Wear Ring KTV2-55 BR+NR | Part no. 031-000-10 · Fits KTV3-55, KTVE35.5-51 | |
| Wear Ring KTV2-8 BR+NR | Part no. 031-141-26 · Fits KTVE2.75-50 | |
| Strainer Stand KTV2-15/22 SPCC | Part no. 023-432-19 · Fits KTV2-15, KTV2-22, KTVE21.5-51, KTVE22.2-51 | |
| Strainer Stand KTV2-37 SPCC | Part no. 023-434-11 · Fits KTV2-37, KTV2-37H, KTVE33.7-50 | |
| Strainer Stand KTV2-55 SPCC | Part no. 023-444-14 · Fits KTV3-55, KTVE35.5-51 | |
| Strainer Stand KTV2-8 SPCC | Part no. 023-439-16 · Fits KTVE2.75-50 | |
| Other Core Parts | ||
| Bearing 6305ZZC3 | Part no. 052-108-13 · Fits KTV2-15, KTV2-22, KTV3-55, KTVE21.5-51, KTVE22.2-51, KTVE35.5-51 | |
| Bearing (w/O-ring) AC-6204ZZC3 | Part no. 052-187-16 · Fits KTV2-15, KTV2-22, KTVE2.75-50, KTVE21.5-51, KTVE22.2-51 | |
| Bearing 6304ZZC3 | Part no. 052-107-12 · Fits KTV2-37, KTV2-37H, KTVE33.7-50 | |
| Bearing 6306ZZC3 | Part no. 052-109-14 · Fits KTV2-37, KTV2-37H, KTVE33.7-50 | |
| Bearing 6307ZZC3 | Part no. 052-110-18 · Fits KTV3-55, KTVE35.5-51 | |
| Bearing 6203ZZC3 | Part no. 052-102-17 · Fits KTVE2.75-50 | |
| Motor Protector 220V-50HZ KA311-DAXL78 (T) | Part no. 053-272-12 · Fits KTV2-15, KTVE21.5-51 | |
| Motor Protector 380/400/415V-50HZ KA313-GQXL104 (T) | Part no. 053-411-15 · Fits KTV2-22, KTVE22.2-51 | |
| Motor Protector 380/400/415V-50HZ KA313-GCXL103 (H) | Part no. 053-438-18 · Fits KTV2-37, KTV2-37H | |
| Motor Protector KA313-GDXL103 (H) | Part no. 053-499-12 · Fits KTV2-37 | |
| Motor Protector 380/400/415V-50HZ KA314-HRXL00 (H) | Part no. 053-440-13 · Fits KTV3-55 | |
| Motor Protector 380/400/415V-50HZ KA311-DAXL68 (T.C) | Part no. 053-443-16 · Fits KTVE2.75-50 | |
| Motor Protector 380V-60HZ KA313-GBXL103 (T.C) | Part no. 053-422-19 · Fits KTVE33.7-50 | |
| Motor Protector 380/400/415V-50Hz KA314-HRXL00 (H.C) | Part no. 053-001-63 · Fits KTVE35.5-51 | |
| Oil Casing KTV2-15/22 ADC | Part no. 029-000-77 · Fits KTV2-15, KTV2-22, KTVE21.5-51, KTVE22.2-51 | |
| Oil Casing KTV2-37 ADC | Part no. 029-000-78 · Fits KTV2-37, KTV2-37H, KTVE33.7-50 | |
| Oil Casing KTV2-55 ADC | Part no. 029-000-79 · Fits KTV3-55, KTVE35.5-51 | |
| Oil Casing KTV2-8 (ADC) | Part no. 029-407-13 · Fits KTVE2.75-50 | |
How we confirm the exact part: Part numbers on this page are as printed in the Tsurumi (Europe) parts lists for 50 Hz models, and service guidance is from the Tsurumi operation manual (B-10140-10). Voltage versions of some parts (for example motor protectors) differ, so send the nameplate details or a photo and we’ll confirm the right part before we quote.
Service Intervals & When to Replace
- Mechanical seal: check the oil every 6 months or 3,000 hours (KTV2.75 and KTVE2.75: every 6 months or 1,000 hours). If it is milky or has water in it, the mechanical seal is letting water in and needs replacing.
- Oil: change it every 12 months or 6,000 hours (KTV2.75 and KTVE2.75: every 12 months or 2,000 hours) with turbine oil VG32 (non-additive), to the volume in the table above.
- Packing & O-rings: fit a new set every time the pump is opened or inspected.
- Impeller & suction cover: a clear drop in head or flow usually means a worn impeller or a blocked strainer. Worn impellers have sharp edges, so handle with gloves, and check the impeller turns freely without rubbing after refitting.
- Overhaul: Tsurumi recommends a full overhaul every 2 to 5 years, even if the pump seems fine.
- Wear ring: the rubber wear ring seals the impeller to the casing; replace it with the impeller when worn.
Models
Covers six KTV and five KTVE models. KTVE is the automatic version. The model is on the pump nameplate.
Models & Key Specifications
| Model | Output | Max head | Max capacity | Weight | Oil |
|---|---|---|---|---|---|
| KTV2-15 | 1.5 kW | 20.0 m | 420 L/min | 21 kg | 270 mL |
| KTV2-22 | 2.2 kW | 24.0 m | 525 L/min | 23 kg | 270 mL |
| KTV2-37 | 3.7 kW | 26.5 m | 830 L/min | 36 kg | 400 mL |
| KTV2-37H | 3.7 kW | 33.8 m | 500 L/min | 36 kg | 400 mL |
| KTV2.75-51 | 0.75 kW | 15.0 m | 320 L/min | 12.5 kg | 150 mL |
| KTV3-55 | 5.5 kW | 35.0 m | 980 L/min | 47 kg | 680 mL |
| KTVE2.75-50 | 0.75 kW | 15.0 m | 320 L/min | 13.3 kg | 150 mL |
| KTVE21.5-51 | 1.5 kW | 20.0 m | 420 L/min | 22 kg | 270 mL |
| KTVE22.2-51 | 2.2 kW | 24.0 m | 525 L/min | 25 kg | 270 mL |
| KTVE33.7-50 | 3.7 kW | 26.5 m | 830 L/min | 40 kg | 400 mL |
| KTVE35.5-51 | 5.5 kW | 35.0 m | 980 L/min | 52 kg | 680 mL |
Figures from the Tsurumi 3-phase operating instructions (B-10140-10), 400 V 50 Hz. Weight is dry weight; oil is turbine oil VG32. KTVE2.75-50 row uses the manual’s KTVE2.75-51 entry.
Troubleshooting
Pump fails to start
Likely cause: Pump new/repaired and tested: supply voltage may not match rating plate; earth insulation or winding continuity fault; Pump previously in satisfactory use: as above, plus impeller jammed (stone, debris, rust between impeller blades and suction cover after long disuse). Action: Check applied voltage agrees with rating plate; At cable free end (never open motor) check earth-lead insulation (over 20 M Ohm) and winding continuity; on 3-phase check the three winding ohm values are within ±10%; Check impeller is free.
Pump starts but stops immediately, causing the motor protector to actuate
Likely cause: Motor windings or cable damaged; Impeller blocked or choked; If pump is new, wrong voltage or frequency; Voltage too low (most common cause); Inexact frequency from diesel generator; Wrong direction of rotation; Liquid of too high viscosity or density; Wrong setting of thermal overload unit. Action: Do not open motor; check insulation/continuity as above; Check supply voltage under load; Correct rotation, overload setting, supply.
The pump's head and pumping volume is lower
Likely cause: Wrong direction of rotation; Piping resistance too high; Impeller worn, partially choked or severely narrowed by hard deposits; Strainer or inlet blocked; Pump draws air, or liquid is partly volatile or contains high level of gas in solution. Action: Correct the listed cause (manual gives causes only).
The pump generates noise or vibration
Likely cause: Wrong direction of rotation; Solid object (stone, etc.) in volute; Impeller severely damaged, or bearing damaged; Pump lying on its side and drawing a little air. Action: Repair damaged impeller/bearing at once; High wear rate likely if pump lies on side drawing air - reposition.
Request for Quotation
Selected Parts:
- No parts selected
Not sure which parts? Just send a photo of the nameplate or part below.